Panasonic PT AE700U Lcd Projector - Page 15

Correcting keystone distortion (KEYSTONE) When either the projector or the screen is tilted, the keystone distortion will affect the image. You can correct the image proportions by the following procedure. (Vertical keystone distortion correction only.) Press the KEYSTONE button. KEYSTONE 0 Vertical keystone distortion correction Operation Press the H button. Press the I button. NOTE: B Vertical keystone distortion can be corrected to ±30° of the angle of tilt. However, the greater the correction amount, the more the picture quality will deteriorate, and the harder it will become to achieve a good level of focus. To obtain the best picture quality, set up the projector and screen in such a way that the amount of keystone correction required is as minimal as possible. B The picture size will also change when correction of keystone distortion is carried out. B You can also correct keystone distortion from the "KEYSTONE" in the "MAIN MENU". B Keystone distortion of the on-screen display will not be corrected. B Keystone distortion may remain depending on the lens shift adjustment. Pausing a picture (FREEZE) Press the FREEZE button. Still picture 28-ENGLISH B The picture being projected will be paused. B Press the FREEZE button again to cancel the still picture. Selecting the picture mode (PICTURE MODE) You can select the appropriate picture mode for the type of projected image. Press the PICTURE MODE button. B Pressing the PICTURE MODE button will change the picture mode. NORMAL When watching various image sources. DYNAMIC ...........When the projector is used in a bright room. CINEMA1 When watching movies. The projected image will be refined. This mode was well tuned to the look of Hollywood movie. CINEMA2 When watching movies. The projected image will be clear and have high contrast. CINEMA3 When watching movies. The projected image will have deep, rich colors. VIDEO When watching video sources such as music or sports programs. NATURAL...........To reproduce the color of the image faithfully from the image source. NOTE: B The picture mode can be also selected in the "PICTURE" menu. B When the "PICTURE MODE" menu is selected, the settings will switch automatically to the last "PROFILE" settings (page 32) that were used for the selected picture mode. Turning on the button lights (LIGHT) Press the LIGHT button. B The buttons on the remote control unit will be illuminated. B Press the LIGHT button again to turn off the button lights. The button lights will be turned off automatically when no buttons on the remote control unit are pressed for 10 seconds. ENGLISH-29 Useful functions