Panasonic PT AE700U Lcd Projector - Page 24

Option settings Press the F or G button to select an item, and then press the I or H button to change the setting. OPTION OSD ON NR ON CINEMA REALITY ON BACK COLOR BLUE WSS ON FRONT/REAR FRONT DESK/CEILING DESK FAN CONTROL NORMAL LAMP POWER HIGH LAMP RUNTIME 5H SELECT ADJ ESC OSD OSD ON [ OFF ON The signal name is displayed in the top-right corner of the screen when the input signal is changed. OFF Use this setting when you do not want the signal name to be displayed. NOTE: B The setting for "TV-SYSTEM" will also be displayed when an S-VIDEO/VIDEO signal is being input. Noise Reduction (NR) NR ON [ OFF If the signal is of such poor quality that picture interference appears, set "NR" to "ON". To turn off the "NR" feature, set to "OFF". NOTE: B "NR" cannot be set when HDMI signals are being input. 46-ENGLISH CINEMA REALITY [S-VIDEO/VIDEO/PC/HDMI/525i (480i), 625i(576i), 1 125(1 080)/60i and 1 125(1 080)/50i YPBPR only] CINEMA REALITY ON [ OFF ON Set to "ON" when you would like 24 frames per second pictures (such as movies) to project the source faithfully. OFF Set to "OFF" when the projected pictures have problems with captions or subtitles when the setting is "ON". BACK COLOR BACK COLOR BLUE [ BLACK This sets the color which is projected onto the screen when no signal is being input to the projector. WSS WSS ON [ OFF ON When WSS (Wide Screen Signalling) is detected from PAL or 625i(576i) YPBPR signals, the aspect ratio will also be switched automatically. OFF WSS will not be detected from PAL or 625i(576i) YPBPR signals. FRONT/REAR FRONT/REAR FRONT [ REAR This setting should be changed in accordance with the projector setting-up method. (Refer to page 16.) FRONT When the projector is placed in front of a screen. REAR When using a translucent screen. DESK/CEILING DESK/CEILING DESK [ CEILING This setting should be changed in accordance with the projector setting-up method. (Refer to page 16.) DESK When the projector is placed on a desk or similar. CEILING When the projector is suspended from a ceiling using the ceiling bracket (sold separately). FAN CONTROL FAN CONTROL NORMAL [ HIGH Set "FAN CONTROL" to "HIGH", when using this projector at high elevations (above 1 400 m) only. LAMP POWER LAMP POWER HIGH [ LOW This setting changes the lamp brightness. When set to "LOW", the luminance of the lamp is reduced, but the projector uses less power, and the operating noise is also reduced. The "LOW" setting is recommended for narrow rooms where a high picture luminance is not essential or for watching movies. NOTE: B "LAMP POWER" cannot be set when no signal is being input. LAMP RUNTIME This setting displays the usage time for the lamp unit which is currently being used. When replacing the lamp unit, follow the instructions on page 52, and reset "LAMP RUNTIME" to "0". NOTE: B The lamp's operating life varies depending on the usage conditions (such as the "LAMP POWER" setting and the number of times the power is turned on and off). ENGLISH-47 Adjustments and settings