Panasonic PT-DW5000U Dlp Projector- English/french - Page 13
Side-mounted Connection Terminals, Lan Link/act Lamp Green
UPC - 791871111338
View all Panasonic PT-DW5000U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Side-mounted connection terminals R/PR G/Y B/PB SYNC/HD VD VIDEO IN S-VIDEO IN REMOTE 1 IN OUT RGB 1 IN REMOTE 2 RGB 2 IN IN SERIAL OUT DVI-D IN LAN VIDEO IN terminal (page 22) An input terminal for video signals. (BNC) S-VIDEO IN terminal (page 22) An input terminal for S-video signals. (MIN4-pin DIN) This terminal complies with S1 signals and automatically toggles between 16:9 and 4:3 according to the size of input signals. RGB 1 input (RGB 1 IN) terminal (page 22) A terminal to input RGB or YPBPR signals. (BNC) RGB 2 input (RGB 2 IN) terminal (page 22) A terminal to input RGB or YPBPR signals. (D-SUB 15-pin female) DVI-D IN terminal (page 22) DVI-D signals are applied to this terminal. (24-pin DVI connector) LAN terminal (page 38) This terminal is used to control the projector from the PC. (10Base-T/100Base-TX compliant) LAN terminal (10Base-T/100Base-TX) Connect LAN cable. LAN 10/100 lamp (Yellow) Lights up when 100Base-TX connected. LAN LINK/ACT lamp (Green) Lights up when connected. Flashes when receiving/sending signals. REMOTE1 lN/OUT terminal (page 16) When two or more main units are used in the system, they can be connected and controlled with M3 stereo mini jack cable available in the market. REMOTE2 IN terminal The user can remotely control the main unit by using an external control circuit to this terminal. (D-SUB 9-pin female) SERIAL IN terminal (pages 22, 39) Use the RS232C serial terminal as an alternative interface for controlling the projector from your PC. (D-SUB 9-pin female) SERIAL OUT terminal (pages 22, 39) The signal applied to the serial input terminal appears at this terminal. (D-SUB 9-pin male) 13