Panasonic SAAK300 SAAK200 User Guide - Page 10

Before using A DEMO B C 10 RQT6085 A Turning the demo function off If the clock has not been set, a demonstration of the display is shown when the unit is switched to standby mode. This function is set to on at the time of purchase. During standby mode Press and hold [L/-DEMO] until "NO DEMO" is displayed. The display changes each time the button is held down. NO DEMO (off) ↔ DEMO ON (on) To show a demonstration of the display Press and hold [L/-DEMO] until "DEMO ON" is displayed. Note • You cannot turn demo function off when the unit is on. • (SC-AK500) (SC-AK300) DEMO function cannot be turned on in Full-Dim mode. • (SC-AK490) (SC-AK200) DEMO function cannot be turned on when Dimmer is on. Convenient functions B To dim the display panel Remote control only Use this for better television viewing. SC-AK500 SC-AK300 Press [DIMMER]. Every time you press the button: Semi-Dim Full-Dim Restores the original display Semi-Dim: The backlights of the display are turned off. Full-Dim: The display is dimmed and the backlights of the display and the indicator, except for the AC supply indicator, are turned off. SC-AK490 SC-AK200 Press [DIMMER]. The display is dimmed and the indicator is turned off. (The AC supply indicator remains on.) Press [DIMMER] again to restore the display. C To mute the volume Remote control only This feature is convenient when you have a telephone call, etc. Press [MUTING]. Press the button again to cancel. "MUTING" goes out. Muting can also be cancelled by lowering the volume all the way (--dB). When the system is turned off, the muting operation will be automatically cancelled.