Panasonic SAAK300 SAAK200 User Guide - Page 17

4 1 2 PROGRAM 3 4 5 7 A B Compact disc operations 3 5 2 1 • 7 Specified track number Program order Listening to compact discs Program play Remote control only You can program up to 24 tracks.by remote control only 1 Press [CD :/ J] and then [L]. 2 Press [PROGRAM]. 3 Press [DISC]. 4 (within 10 seconds or so) Press [1] - [5] to select the disc you want. 5 Press the numeric button to select the desired track. 6 Repeat steps 3 through 5 until you have programmed all the tracks you want. 7 Press [CD :/ J]. Play will start in the programmed sequence. To cancel program play mode Press [PROGRAM] in the stop mode. Programmed contents will be saved in memory. To clear all programmed tracks Press [L] in the stop mode. "CLEAR" is displayed. To select a two-digit track Press [≥10] and then the two numbers you want within 10 seconds or so. For example Track no. 20: [≥10] © [2] © [0] Track no. 35: [≥10] © [3] © [5] A When "CD FULL" appears The number of programmed tracks is limited to 24. No further tracks can be programmed. B You can do the following during program mode: • Check program contents. Press [g/REW/4] or [3/FF/f]. Every time you press one of the buttons, the track and program No. are shown on the display. • Add to the program. Repeat steps 3 through 5. Memory retention Your program is retained in memory for about 2 weeks while the system is unplugged. To replay your program If you turned OFF your program with [PROGRAM], you can play it again as explained below. 1. Press [PROGRAM]. 2. Press [CD :/ J]. If you program a track not on your CDs The track is initially programmed, but during program play, the player will skip that track and will continue playing from the next programmed item. Indicates program mode 17 RQT6085