Panasonic SAAK300 SAAK200 User Guide - Page 31

Specifications AMPLIFIER SECTION SC-AK500 Power output 10% Total harmonic distortion 60 Hz-3 kHz, both channels driven (Low channel) 60 W per channel (6 Ω) 3 kHz-16 kHz, both channels driven (High channel) 50 W per channel (6 Ω) Total Bi-Amp power 110 W per channel Power output 10% Total harmonic distortion 1 kHz, both channels driven (Low channel) 77 W per channel (6 Ω) 8 kHz, both channels driven (High channel) 73 W per channel (6 Ω) Total Bi-Amp power 150 W per channel Input sensitivity AUX 250 mV Input Impedance AUX 13.3 kΩ AMPLIFIER SECTION SC-AK490 Power output 10% Total harmonic distortion 60 Hz-3 kHz, both channels driven (Low channel) 45 W per channel (6 Ω) 3 kHz-16 kHz, both channels driven (High channel) 45 W per channel (6 Ω) Total Bi-Amp power 90 W per channel Power output 10% Total harmonic distortion 1 kHz, both channels driven (Low channel) 56 W per channel (6 Ω) 8 kHz, both channels driven (High channel) 54 W per channel (6 Ω) Total Bi-Amp power 110 W per channel Input sensitivity AUX 250 mV Input Impedance AUX 13.3 kΩ AMPLIFIER SECTION SC-AK300 Power output 10% Total harmonic distortion 60 Hz-3 kHz, both channels driven (Low channel) 45 W per channel (6 Ω) 3 kHz-16 kHz, both channels driven (High channel) 45 W per channel (6 Ω) Total Bi-Amp power 90 W per channel Power output 10% Total harmonic distortion 1 kHz, both channels driven (Low channel) 56 W per channel (6 Ω) 10 kHz, both channels driven (High channel) 54 W per channel (6 Ω) Total Bi-Amp power 110 W per channel Input sensitivity AUX 250 mV Input Impedance AUX 13.3 kΩ AMPLIFIER SECTION SC-AK200 Power output 10% Total harmonic distortion 60 Hz-3 kHz, both channels driven (Low channel) 30 W per channel (6 Ω) 3 kHz-16 kHz, both channels driven (High channel) 30 W per channel (6 Ω) Total Bi-Amp power 60 W per channel Power output 10% Total harmonic distortion 1 kHz, both channels driven (Low channel) 42 W per channel (6 Ω) 10 kHz, both channels driven (High channel) 38 W per channel (6 Ω) Total Bi-Amp power 80 W per channel Input sensitivity AUX 250 mV Input Impedance AUX 13.3 kΩ FM TUNER SECTION Frequency range 87.9 - 107.9 MHz (200 kHz steps) 87.5 - 108.0 MHz (100 kHz steps) Sensitivity 2.5 µV (IHF) S/N 26 dB 2.2 µV Antenna terminal(s) 75 Ω (unbalanced) AM TUNER SECTION Frequency range 520 - 1710 kHz (10 kHz steps) Sensitivity S/N 20 dB (at 1000 kHz) 560 µV/m CASSETTE DECK SECTION Track system 4 track, 2 channel Heads Record/playback Solid permalloy head Erasure Double gap ferrite head Motor DC servo motor Recording system AC bias 100 kHz Erasing system AC erase 100 kHz Tape speed 4.8 cm/s (17/8 ips) Overall frequency response (+3 dB, -6 dB at DECK OUT) NORMAL (TYPE I) 35 Hz - 14 kHz S/N 50 dB (A weighted) Wow and flutter 0.18% (WRMS) Fast forward and rewind time Approx. 120 seconds with C-60 cassette tape CD SECTION Sampling frequency 44.1 kHz Decoding 16 bit linear Beam source/wavelength Semiconductor laser/780 nm Number of channels Stereo Frequency response 20 Hz-20 kHz (+1, -2 dB) Wow and flutter Below measurable limit Digital filter 8 fs D/A converter MASH (1 bit DAC) MP3 ( SC-AK500 and SC-AK490 only) MP3 decode Base on MPEG 1 Layer 3 Bitrate 32 kbps-320 kbps Sampling frequency 32 kHz, 44.1 kHz, 48 kHz SPEAKER SECTION SB-AK500 Type 3 way speaker system Speaker(s) Woofer Tweeter Super tweeter 12 cm (43/4˝) cone type 6 cm (23/8˝) cone type Piezo type Impedance HIGH 6 Ω LOW 6 Ω Input power HIGH 130 W (Music) LOW 130 W (Music) Output sound pressure level 85 dB/W (1.0 m) Cross over frequency 3.5 kHz Frequency range 45 Hz-22 kHz (-16 dB) 55 Hz-20 kHz (-10 dB) Dimensions (WxHxD) 210 x 315 x 251 mm Mass (89/32˝ x 1213/32˝ x 923/32˝) 2.8 kg (6.3 lb.) SPEAKER SECTION SB-AK300 Type 3 way speaker system Speaker(s) Woofer Tweeter Super tweeter 12 cm (43/4˝) cone type 6 cm (23/8˝) cone type Piezo type Impedance HIGH 6 Ω LOW 6 Ω Input power HIGH 100 W (Music) LOW 100 W (Music) Output sound pressure level 85 dB/W (1.0 m) Cross over frequency 3.5 kHz Frequency range 45 Hz-22 kHz (-16 dB) 55 Hz-20 kHz (-10 dB) Dimensions (WxHxD) 210 x 315 x 251 mm Mass (89/32˝ x 1213/32˝ x 923/32˝) 2.8 kg (6.3 lb.) SPEAKER SECTION SB-AK200 Type 2 way speaker system Speaker(s) Woofer Tweeter Impedance 12 cm (43/4˝) cone type 6 cm (23/8˝) cone type HIGH 6 Ω LOW 6 Ω Input power HIGH 80 W (Music) LOW 80 W (Music) Output sound pressure level 85 dB/W (1.0 m) Cross over frequency 3.5 kHz Frequency range 45 Hz-22 kHz (-16 dB) 55 Hz-20 kHz (-10 dB) Dimensions (WxHxD) 210 x 315 x 228 mm Mass (89/32˝ x 1213/32˝ x 831/32˝) 2.6 kg (5.7 lb.) GENERAL Power supply AC 120 V, 60 Hz Power consumption SC-AK500 SC-AK490 (250 VA) 215 W SC-AK300 165 W SC-AK200 150 W Standby Approx. 0.34 W Dimensions (WxHxD) 250 x 315 x 345 mm Mass (927/32˝ x 1213/32˝ x 1319/32˝) SC-AK500 SC-AK490 (For U.S.A.) 7.8 kg (17.2 lb.) SC-AK500 (For Canada) 7.5 kg (16.5 lb.) SC-AK300 7.4 kg (16.3 lb.) SC-AK200 6.9 kg (15.2 lb.) Notes: 1. Specifications are subject to change without notice. Mass and dimensions are approximate. 2. Total harmonic distortion is measured by the digital spectrum analyzer. 3. The labels "HIGH" and "LOW" on the rear of the speakers refer to High frequency and Low frequency. Reference 31 RQT6085