Panasonic SAAK300 SAAK200 User Guide - Page 26
Using the play/record timer, Timer operations
View all Panasonic SAAK300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
PLAY/REC CLOCK/TIMER Using the timer Using the play/record timer Remote control only To change the timer Press [rPLAY/REC] to select the desired timer. Every time the button is pressed the setting changes as follows. PLAY REC (OFF) To check settings While the unit is on and the "rPLAY" (or "rREC") indicator is on, press [CLOCK/TIMER] so "rPLAY" (or "rREC") appears on the display. Two seconds after "rPLAY" (or "rREC") appear, the settings are displayed in the following order: • For play timer 1 Play start time • For record timer 1 Recording start time 2 Play finish time 2 Recording finish time 3 Play source 3 Recording source 4 Playback volume You can check the settings even when the system is OFF by pressing [CLOCK/TIMER] twice. To enjoy the desired source after the timer setting is completed The volume level (for play timer) and music source are stored in the timer memory and the timer will start in these preset conditions. However, the Disc numbers do not get stored in the timer memory. 1. After step 4, start playing the desired source. 2. Reset the Disc numbers if you have changed any of them, confirm that a Disc or cassette is inserted, then press [f] to put the unit on standby. Notes • If you switch the system to the standby mode while the play/record timer is functioning, the OFF time setting will not be activated. • If AUX is selected as the source, when the timer comes ON, the system will turn ON and will engage "AUX" as the source. If you want to playback or record from a connected component, set the component's timer to the same time. (See the instruction manual that came with the component.) Timer operations 26 RQT6085