Panasonic SAAK300 SAAK200 User Guide - Page 13

Radio operations A TUNER PROGRAM PROGR A M B 1 PLAY MODE 2 11 2 3 4 5 6 10 7 8 9 0 Preset channel Presetting radio broadcasts Remote control only There are two methods of presetting stations. Automatic presetting : All the stations the tuner can receive are preset. Manual presetting : You can select the stations to preset and the order they are preset in. Up to 15 stations each can be set in the FM and AM bands. Preparation: Press [TUNER] to select "FM" or "AM". A Automatic presetting Do the following once each for FM and AM. Preparation: Tune to the frequency where presetting is to begin (z page 12). Press and hold [PROGRAM]. Release the button when frequency begins to change. The tuner presets all the stations it can receive into the channels in ascending order. When finished, the last station memorized is tuned in. Manual presetting Preset the stations one at a time. 1 Press [PROGRAM] then press [g/REW/4] or [3/ FF/f] to tune to the required station. 2 Press [PROGRAM] then press [g/REW/4] or [3/ FF/f] to select a channel. 3 Press [PROGRAM]. The station occupying a channel is erased if another station is preset in that channel. B Selecting channels 1 Press the numbered buttons to select the channel. • To enter channel 10 or over. Press [j], then the two digits. OR 1 Press [PLAY MODE] to select "PRESET". 2 Press [g/REW/4] or [3/FF/f] to select the channel. 2 Adjust the volume. 2 VOLUME 13 RQT6085