Panasonic SAAK300 SAAK200 User Guide - Page 6

Before using 1 3 2 Connections Basic connections (for supplied accessories) • Plug the AC power supply cord into a household AC outlet only after all other connections have been made. • To prepare the antenna wires and speaker cords, twist the vinyl cover tip and pull off. 1 1 2 4 FM ( ANT ) GND 2 Adhesive tape FM indoor antenna AM loop antenna AM ANT LOOP EXT 3 1 2 Red (+) Black (-) Blue (-) Gray (+) Gray Blue Black Red 1 Connect the FM indoor antenna. Tape the antenna to a wall or column, in a position where radio signals are received with the least amount of interference. Note For best reception sound quality: An FM outdoor antenna is recommended. (See page 7.) 2 Connect the AM loop antenna. After attaching the antenna, turn on the system and tune in a broadcast station. Put the antenna where the reception is best and interference is minimal. 3 Connect the speaker cables. Connect each end of the speaker cables to the terminal lever of the same color so (+) and (-) are correct. Never allow the exposed wires to contact each other when connected. Incorrect connection can damage the unit. Caution • Use only the supplied speakers. The combination of the main unit and speakers provide the best sound. Using other speakers can damage the unit and sound quality will be negatively affected. Caution • Use the speakers only with the recom- mended system. Failure to do so may lead to damage to the amplifier and/or the speakers, and may result in the risk of fire. Consult a qualified service person if damage has occurred or if you experience a sudden change in performance. • Do not attach these speakers to walls or ceilings. 4 Connect the AC power supply cord. Note The included AC power supply cord is for use with this unit only. Do not use it with other equipment. 6 RQT6085