Panasonic SC-BTT195 SCBTT190 User Guide - Page 37
Enjoying sound effects from all speakers
View all Panasonic SC-BTT195 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
∫ Delay time For optimum listening with 5.1-channel sound, all the speakers, except for the subwoofer, should be the same distance from the seating position. If either distance 1 or 2 is less than 3, measure the distance and adjust the time to make up for the difference (see the table below). L LS LS C C R 13 SW 2 RS RS : A : B 1 2 3: Primary listening distance A Actual speaker position B Ideal speaker position 1 Press [3, 4, 2, 1] to select the distance box ( ms 0.0 ) and press [OK]. 2 Press [3, 4] to select the setting and press [OK]. Delay time for the Center speaker Subtract the distance 1 from 3 Distance (Approx.) Setting 34 cm (1 ft. 1 in.) 1.0 ms 68 cm (2 ft. 2 in.) 2.0 ms 102 cm (3 ft. 4 in.) 3.0 ms 136 cm (4 ft. 5 in.) 4.0 ms 170 cm (5 ft. 6 in.) 5.0 ms Delay time for the Surround speakers Subtract the distance 2 from 3 Distance (Approx.) 170 cm (5 ft. 6 in.) 340 cm (11 ft. 1 in.) 510 cm (16 ft. 8 in.) Setting 5.0 ms 10.0 ms 15.0 ms Enjoying sound effects from all speakers For more details on each setting, refer to "Audio Settings" on the Option menu(> 30) Surround Effects 1 Press [SURROUND]. 2 Press [3, 4] to select "MULTI CH SOURCE" or "2CH SOURCE", and then press [OK]. e.g., 3 While the selected mode is displayed Press [3, 4] to select the desired setting. (> 30) ∫ Adjusting speaker level during play 1 Press [CH SELECT] to activate the speaker setting mode. 2 Press [CH SELECT] several times to select the speaker. ≥Press [2, 1] to adjust the balance of the front speakers. 3 Press [3] (increase) or [4] (decrease) to adjust the speaker level for each speaker. s6 dB to r6 dB Sound Effects 1 Press [SOUND]. 2 Press [3, 4] to select "2CH SOURCE" or " ALL SOURCE", and then press [OK]. e.g., 3 While the selected mode is displayed Press [3, 4] to select the desired setting and press [OK]. Repeat this procedure if necessary. (> 30) To finish the speaker setting Press [3, 4, 2, 1] to select "Complete" and press [OK]. ≥ The sound effects/modes may not be available or have no effect with some sources. ≥ You may experience a reduction in sound quality when these sound effects/modes are used with some sources. If this occurs, turn the sound effects/modes off. Advanced operations 37 VQT3X51