Panasonic TH-47LFX6 Operating Instructions - Page 32

Adjusting Pos. /Size

Get Panasonic TH-47LFX6 PDF manuals and user guides View all Panasonic TH-47LFX6 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 32 highlights

Adjusting Pos. /Size 1 Press to display the Pos. /Size menu. Pos. /Size Normalise Normal 2 Press to select the menu to adjust. Auto Setup H-Pos 0 H-Size 0 V-Pos 0 V-Size 0 Clock Phase 0 3 Press to adjust the menu. Dot Clock 1:1 Pixel Mode 0 Off 4 Press to exit from adjust mode. Notes: Unadjustable items are grayed out. Adjustable items differ depending on the input signal and the display mode. Note: If a "Cue" or "Rew" signal from a VCR or DVD player is received, the picture position will shift up or down. This picture position movement cannot be controlled by the Picture Pos./Size function. Auto Setup H-Pos/V-Pos, H-Size/V-Size, Dot Clock and Clock Phase are automatically adjusted when the PC signal is received. This setting only operates when a PC signal is input, and the aspect is "16:9". Using Remote Control When on the remote control is pressed, "Auto Setup" will be executed. When Auto Setup does not work, "Invalid" is displayed. Notes: • Auto Setup may not work when a cropped or dark image is input. In such case, switch to a bright image with borders and other objects are clearly shown, and then try auto setup again. • Depending on the signal, out of alignment may occur after Auto Setup. Carry out ¿ne tuning for the position/size as required. • If Auto Setup cannot set properly for vertical frequency 60Hz XGA signal (1024×768@60Hz and 1366×768@60Hz), pre-selecting the individual signal in "XGA Mode" (see page 40) may results in correct Auto Setup. • Auto Setup does not work well when a signal such as additional information is superimposed out of valid image period or intervals between synchronizing and image signals are short. • If Auto Setup cannot adjust correctly, select "Normalise" once and press ACTION ( ), then adjust Pos. /Size manually. • If the picture goes off screen in the horizontal direction as a result of performing Auto Setup, perform Dot Clock adjustment. 24

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
24
0
Normal
Normalise
Auto Setup
Pos. /Size
V-Pos
0
H-Pos
V-Size
Clock Phase
H-Size
1:1 Pixel Mode
Dot Clock
0
0
0
0
Off
Notes:
Unadjustable items are grayed
out.
Adjustable items differ depending
on the input signal and the display
mode.
Adjusting Pos. /Size
1
Press to display the Pos. /Size menu.
Press to select the menu to adjust.
Press to adjust the menu.
Press to exit from adjust mode.
3
2
Note:
If a “Cue” or “Rew” signal from a VCR or DVD player is received, the picture position will shift up or down. This picture
position movement cannot be controlled by the Picture Pos./Size function.
4
Auto Setup
H-Pos/V-Pos, H-Size/V-Size, Dot Clock and Clock Phase are automatically adjusted when the PC
signal is received.
This setting only operates when a PC signal is input, and the aspect is “16:9”.
Using Remote Control
When
on the remote control is pressed, “Auto Setup” will be executed.
When Auto Setup does not work, “Invalid” is displayed.
Notes:
•
Auto Setup may not work when a cropped or dark image is input. In such case, switch to a bright
image with borders and other objects are clearly shown, and then try auto setup again.
•
Depending on the signal, out of alignment may occur after Auto Setup. Carry out
¿
ne tuning for the
position/size as required.
•
If Auto Setup cannot set properly for vertical frequency 60Hz XGA signal (1024×768@60Hz and
1366×768@60Hz), pre-selecting the individual signal in “XGA Mode” (see page 40) may results in
correct Auto Setup.
•
Auto Setup does not work well when a signal such as additional information is superimposed out of
valid image period or intervals between synchronizing and image signals are short.
•
If Auto Setup cannot adjust correctly, select “Normalise” once and press ACTION (
), then adjust
Pos. /Size manually.
•
If the picture goes off screen in the horizontal direction as a result of performing Auto Setup, perform
Dot Clock adjustment.