Panasonic TH-47LFX6 Operating Instructions - Page 35

Picture Adjustments Item Backlight Effect Darker Brighter Adjustments Adjusts luminance of the back light. Contrast* Less Brightness Darker More Brighter Selects the proper brightness and density for the room. Adjusts for easier viewing of dark pictures such as night scenes and black hair. Notes: • You can change the level of each function (Backlight, Contrast, Brightness, Sharpness) for each Picture Mode. • The setting details for normal, dynamic and cinema respectively are memorized separately for each input terminal. • "Backlight" can be adjusted when "ECO Mode" is set to "Custom" and "Power save" to "Off". (see page 34) Sharpness Less Adjusts picture sharpness. More * In "ENGLISH (US)" OSD language, this is displayed as "PICTURE". Advanced settings Item Effect Details Input level Less Adjustment of parts which are extremely bright and hard to see. More Gamma W/B High R W/B High G W/B High B Down Less Less Less S Curve 2.0 2.2 2.6 Up Adjusts the white balance for light red areas. More Adjusts the white balance for light green areas. More Adjusts the white balance for light blue areas. More W/B Low R Less Adjusts the white balance for dark red areas. More W/B Low G Less Adjusts the white balance for dark green areas. More W/B Low B Less Adjusts the white balance for dark blue areas. More Notes: • Carry out "W/B" adjustment as follows. 1. Adjust the white balance of the bright sections using the "W/B High R", "W/B High G" and "W/B High B" settings. 2. Adjust the white balance of the dark sections using the "W/B Low R", "W/B Low G" and "W/B Low B" settings. 3. Repeat steps 1 and 2 to adjust. Steps 1 and 2 affect each other's settings, so repeat each step in turn to make the adjustment. • The adjustment values are memorized separately for each input terminal. • The adjustment range values should be used as an adjustment reference. Helpful Hint ( / Normalise Normalisation) On the remote control unit, while the "Advanced settings" menu is displayed, if either the N button is pressed at any time or the ACTION ( ) button is pressed during "Normalise", then all adjustment values are returned to the factory settings. 27