Panasonic TH-47LFX6 Operating Instructions - Page 55
Adjustments
View all Panasonic TH-47LFX6 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Options Adjustments Item Adjustments Button lock Remocon User level Off-timer function Initial Power Mode ID select Remote ID Serial ID Studio W/B Power ON Screen Delay Off On MENU&ENTER Off: All the buttons on main unit can be used. MENU&ENTER: Locks MENU and buttons on main unit. On: Locks all the button on main unit except the Power switch. Sets Button lock with the unit buttons in the following procedure. Off: Press + / four timesĺPress INPUT four timesĺPress - / MENU&ENTER: Press four timesĺPress + / four timesĺPress On: Press - / four timesĺPress four timesĺPress + / four timesĺPress INPUT four timesĺPress four timesĺPress Off User1 User2 User3 Off: You can use all of the buttons on the remote control. User1: You can only use , , , , buttons on the remote control. User2: You can only use button on the remote control. User3:Locks all the buttons on remote control. Enable: Enables the "Off-timer function". Disable:Disables the "Off-timer function". Note: When "Disable" is set, the Off-timer is cancelled. Normal On Standby Sets the power mode of the unit for when the power recovers from failure or after plugging off and in again. Normal: Power returns in as the same state as before the power interruption. Standby:Power returns in standby mode. (Power Indicator : red/orange) On: Power returns in power On. (Power Indicator : green) Note: When using multiple displays, "Standby" is preferred to be set in order to reduce a power load. Sets panel ID number when panel is used in "Remote ID" or "Serial ID". Set value range: 0 - 100 (Standard value: 0) The setting of this menu is valid only when using ID remote control. Off: Disables ID remote control functions. You can use normal remote control operations. On: Enable ID remote control functions. Note: To use the ID remote control function, it is necessary to set each ID number of remote control and display unit. About the setting method, please refer to "ID Remote Control Function" (see page 38) and "ID select" (above-mentioned). Sets the panel ID Control. Off: Disables external control by the ID. On: Enables the external control by the ID. Off: Nullify all the settings adjusted. On: Sets the colour temperature for TV studio. Note: Valid only when the "Warm" is set as "White balance" in Picture menu. Off 1 2 3.... 30 You can set the power-on delay time of the displays to reduce the power load, when you press to turn on the multiple displays that are set together, for example, on MULTI DISPLAY system. Set each display's setting individually. Off: The display will be turned on at the same time as is pressed. 1 to 30 (sec.): Set the power-on delay time (second). After pressing , the display will be powered on with time delay depending on this setting. Notes: • During this function is working, the power indicator is blinking green. • This function also works when the power recovers from failure or after plugging off and in again the power cord. Clock Display Off: Not display the clock. On: Display the clock. The clock is displayed at the lower left of the screen when button is pressed. Note: When "PRESENT TIME Setup" is not set, the clock is not displayed even if "Clock Display" is "On". (see page 29) 10:00 47