Panasonic TH-47LFX6 Operating Instructions - Page 33
Adjusting POS. /SIZE
View all Panasonic TH-47LFX6 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
H-Pos Adjust the horizontal position. Adjusting POS. /SIZE V-Pos Adjust the vertical position. H-Size Adjust the horizontal size. V-Size Adjust the vertical size. Clock Phase (During PC input signal) Eliminate the Àickering and distortion. Dot Clock (During PC input signal) Periodic striped pattern interference (noise) may occur when a striped pattern is displayed. If this happens, adjust so that any such noise is minimized. Over scan Turn image over scan On/Off. Con¿gurable signals are as follows: 525i, 525p, 625i, 625p, 750/60p, 750/50p (DVI, HDMI) 1:1 Pixel Mode On Off Notes: • "Off" is effective during only "16:9" aspect mode. • When "Off" is set, "H-Size" and "V-Size" cannot be adjusted. Adjusts the display size when 1125i or 1125p signal is input. Notes: • "On" is effective during only "16:9" aspect mode. • Select On when you would like to replay 1920 × 1080 input signal. • Applicable input signal; 1125 (1080) / 50i · 60i · 24sF · 24p · 25p · 30p · 50p · 60p • Select Off when Àickering is shown around the image. • H-Size and V-Size cannot be adjusted when On is selected. Off On Helpful Hint ( / Normalise Normalisation) While the Pos. / Size display is active, if either the N button on the remote control is pressed at any time or the ACTION ( ) button is pressed during "Normalise", then all adjustment values (except "Clock Phase" and "Dot Clock") are returned to the factory settings. 25