Panasonic TH-47LFX6 Operating Instructions - Page 41

No activity power off 1 Press to select the menu to adjust. 2 Press to select "Enable" or "Disable". Setup Signal Screensaver Input label ECO Mode settings Wobbling YUV/RGB-in select No activity power off OSD Language 1/2 Off RGB Disable English(UK) 3 Press to exit from Setup. When this function is set to "Enable", the power is turned off (standby) automatically when there is no operation of the Display for 4 hours. Starting from 3 minutes before the turn off, the remaining time will be displayed. Press any key to abort. No activity power off 3min When the power is turned off due to this function, a message "Last turn off due to 'No activity power off'." is displayed next time the power is turned on. Note: During the screensaver is running, this function is disabled. Outdoor mode These settings are con¿gured to preserve the quality of the Display when it is used in a high or low temperature environment. 1 Press to display the Setup menu. 2 Press to select "Outdoor mode". Press to select "On" or "Off". Off: Operates normal standby. On: Mutes pictures in standby mode and turns on the back light when the internal temperature of the display becomes 0 °C or below to prevent further temperature decrease. 3 Press to exit from adjust mode. When this function is set to "On", the following message appears at standby. OUTDOOR MODE IS ACTIVE. Notes: • Do not unplug the power cable while using the Display with this function "On". • When this function is set to "On", the power consumption at standby is approx. 40W. • The fans spin while this is set to "On" even if the Display is in standby mode. • Turn this function "On" to use this product when it is directly exposed to sunlight. 33