Panasonic TH-47LFX6 Operating Instructions - Page 53

Network Setup DIGITAL LINK status Display the DIGITAL LINK connection environment. Select "DIGITAL LINK status" and press . DIGITAL LINK status LINK status HDMI status Signal quality Min Max No Link No HDMI -XX dB -YY dB LINK status HDMI status Signal quality : Either "No link", "DIGITAL LINK", or "Ethernet" will be displayed. No link : No LAN connection, etc. DIGITAL LINK : Connected to the DIGITAL LINK device by LAN Ethernet : The PC is connected to the DIGITAL LINK terminal of this product and is LAN connected : Either "No HDMI", "HDMI ON", or "HDCP ON" will be displayed. No HDMI : DIGITAL LINK not connected HDMI ON : DIGITAL LINK connected HDCP ON : A signal with an HDCP is Àowing with a DIGITAL LINK connection. : It is the quanti¿ed minimum and maximum numbers of errors that have occurred. The display colors are red, yellow, or green, depending on the number. The number is represented by yellow or red if the LAN cable is disconnected or the cable is not shielded. This signal quality shows ¿gures between the twisted pair cable transmitter that is connected and the display. Signal Quality -12dB or below -11 to -8dB -7dB or above Display Colors Green Yellow Red Reception Status The reception is normal Part of the received data is corrupted There are reception dif¿culties Digital Interface Box A switch will be made to the Set up Digital Interface Box menu when "Digital Interface Box" is selected and is pressed. Note: This function can only be selected when the Digital Interface Box (ET-YFB100) made by our company is connected to a LAN terminal and its power is on. 45