Panasonic V4525S PVV4525S User Guide - Page 23

On-Screen Displays (OSD) On-Screen Displays (OSD) Function & Channel Displays CH 08 When a function button is pressed, e.g. PLAY, or you change channels, a 5 second display appears. Blank Tape/ No Video Signal Indications When blank tape is detected during play, or the current channel has no signal (with Weak Signal Display feature (p. 10) set to OFF), the TV screen will turn solid blue. VCR Status & Clock Displays To display or remove overlay at right, ➛ press DISPLAY*. Function Status Rec Time Remaining (OTR mode only. See p. 5 of Basic Operations book.) Broadcast Audio Being Received Current Time REC 12 : 0 0AM CH 02 0 : 25 -0 : 12 : 34 STEREO SP SAP MONO Channel Counter Tape Speed (See p. 3 of Basic Operations book.) Warning and Instruction Displays OSD These displays will alert you to a missed operation or provide further instructions. Caution Page PLEASE SET CLOCK BY PRESSING ACTION KEY If you attempt to set or review a Timer Recording and the Clock is not set... See page 6 of Basic Operations book TURN VCR OFF FOR TIMER RECORDING After a Timer Program has been set... See page 6 of Basic Operations book CHECK CASSETTE RECORD TAB NO CASSETTE If you press REC on the remote control or VCR, and a cassette is inserted with no record tab... See page 3 of Basic Operations book If you press PLAY, FF, REW, or REC on the remote control or VCR without a cassette inserted... See page 5 of Basic Operations book TO CANCEL TIMER REC PRESS POWER THEN STOP KEY VIDEO HEADS MAY NEED CLEANING PLEASE INSERT HEAD CLEANING CASSETTE OR REFER TO MANUAL END :PLAY VCR LOCK ACTIVATED If you press POWER or STOP during a Timer Recording... (visible in VCR mode only) If head cleaning becomes necessary while playing back a tape... If you press a function button other than STOP/EJECT or POWER while the VCR is in VCR Lock mode... See page 6 of Basic Operations book See page 3 of Basic Operations book See page 10 *Important: If a remote control button does not work when pressed, press the VCR button on the remote and try the button again. - 11 -