Panasonic V4525S PVV4525S User Guide - Page 5
Playback / Record on a Tape Connections
UPC - 037988971381
View all Panasonic V4525S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
• Connections • Initial Setup • Clock Set • Select Channel • Playback • Record • Auto Operation Playback / Record on a Tape Playback a Tape 1 Insert a tape. • Loose or peeling labels may cause tape jam. • VCR power comes on. If Auto VCR/TV (see p. 10 of Advanced Operations book) is set to "OFF," press VCR/TV. 2 Press PLAY to play tape. • If tape has no rec. tab (p. 3), auto play begins. Special Features During Play Forward/Reverse Scene Search ➛ Press FF or REW. ➛ Press PLAY to release. After search has begun, each additional press of FF or REW changes speed as shown below. [SP] : Approx. 9X ↔ Approx. 13X [SLP] : Approx. 27X ↔ Approx. 43X Notes • Picture interruption may occur with some TVs. • FF and REW search speed may vary depending on current tape position. • After 10 minutes in search mode, VCR returns to Play mode to protect the tape and the video heads. Still (Freeze) Picture ➛ Press PAUSE/SLOW. ➛ Press PLAY to release. Slow Motion Picture ➛ Hold down PAUSE/SLOW in Still mode. ➛ Press PLAY to release. Notes • These features work best in SP or SLP mode. • The sound will be muted. • To reduce picture noise, see "Manual Tracking Control" on p. 3. • After 3 minutes in Still or Slow mode, VCR stops to protect the tape and the video heads. 3 Press STOP to stop tape. Record on a Tape 1 Insert a tape with a record tab (p. 3). • VCR power comes on. If Auto VCR/TV (see p. 10 of Advanced Operations book) is set to "OFF," press VCR/TV. 2 Press CH or NUMBER keys to select the channel. • If channel number is over 100, first press 100 key then the other 2 digits. • For "LINE" input, see p. 9 of "Advanced Operations" book. 3 Press SPEED to set record speed (p. 3). • SP = Standard Play • SLP = Super Long Play 4 Press REC to start recording. • To edit, press PAUSE/SLOW to pause, and again to resume recording. 5 Press STOP to stop recording. One Touch Recording (recording in progress) Press REC repeatedly to set length as follows: 30 min. ➛ 1 hr. ➛ 1:30 ➛ 2:00 ➛ 3:00 ➛ 4:00 ➛ exit. The VCR shuts off at the length set. Record one station, watch another Press VCR/TV ➛ select channels on TV (recording continues). Select channels on VCR Press VCR/TV in Stop or Pause mode. ➛ select channels on VCR. Notes • Watching one channel and recording another is not possible when using Cable Box or DSS Receiver. • After 5 minutes in Pause mode, VCR stops to protect the tape and the video heads. Rapid Rewind/FF Press REW or FF in Stop mode to rewind or fast forward tape. • Rewinds a T-120 tape in approx. 1 minute. Press EJECT on remote, or STOP/EJECT on VCR to eject tape. This video recorder, equipped with HQ (High Quality) system, is compatible with existing VHS equipment. Only use tapes with the mark. Only tapes tested and inspected for use in 2, 4, 6, and 8 hour machines are recommended. Auto Operation Functions Auto Play Insert a tape ➛ Power comes on ➛ Play starts if there is no record tab (see p. 3). Auto Rewind Play Fast Forward ➛ Tape end ➛ Rewind ➛ Stop Play Auto Eject (Repeat Play must be off) Play ➛ Tape end ➛ Rewind ➛ Stop➛ Tape ejects if there is no record tab. *Important: If a remote control button does not work when pressed, press the VCR button on the remote and try the button again. - 5 -