Panasonic VDR M50 Dvd Camcorder - Page 161
When the DVD Video Camera is connected to PC
UPC - 037988251209
View all Panasonic VDR M50 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 161 highlights
When the DVD Video Camera is connected to PC: Symptom Cause and Correction No drive icon appears on The DVD Video Camera is not turned on. PC. Check the power supply. Driver is not properly recognized. Turn PC off and on again. If the drive icon still does not appear, use "Refresh driver" in Device Manager to reinstall the driver. Turn PC off and then disconnect the USB cable. Turn PC on again, and then use the USB cable to connect the DVD Video Camera to PC. Make sure the USB cable is completely plugged into this DVD Video Camera. If a yellow "!" mark is attached to some device in Windows® Device Manager, uninstall the USB device driver, and then reinstall it, following the procedure on page 133. Error occurs in playback If error occurs with USB connection, the transfer rate is not sufficient. of DVD Video Camera on It is recommended that you use a USB terminal conforming to PC. USB2.0 when connecting the DVD Video Camera. Application is Turn the PC and DVD Video Camera off, and try again. abnormally run on PC. Error occurs during writing to DVD-R disc. The temperature of DVD Video Camera is too high due to continuous operation. Disconnect the DVD Video Camera from PC once, remove the disc from the DVD Video Camera, and then turn it off. After a few moments, connect them again and write to a brand-new disc. Transfer of images stops. Connect the DVD Video Camera to another USB terminal of PC. If your PC is a desktop type, it is recommended that you use USB terminal on the back of PC. DVD-RAM/R/RW drive built into PC cannot be used after the provided software has been installed. This problem may be solved if the software related to DVD-RAM/R/ RW of your PC is upgraded, or if the DVD-RAM driver is uninstalled. However, with Windows® 98 Second Edition / Me / 2000 Professional, uninstalling the DVD-RAM driver will make it impossible for the JPEG stills recorded on DVD-RAM on this DVD Video Camera to be read by the PC. DVD-R disc cannot be played back on DVDMovieAlbumSE. DVD-MovieAlbumSE does not support playback or data read on DVD-R disc: Use optional-user provided DVD video playback software to play back DVD-R disc on PC. Error appears when starting DVDMovieAlbumSE. Make sure that your PC display adapter (video card) conforms to DirectX 8.1. Video written to hard disk DVD-MovieAlbumSE cannot edit DVD-VR data stored on hard disk of PC cannot be edited of PC: Copy the data to another DVD-RAM disc and then edit it. on DVD-MovieAlbum copy tool. Movies are not recognized by application in PC. Make sure the power switch of this DVD Video Camera is set to " ", " " or " ". The DISC EJECT lever While the DVD Video Camera is connected to PC, use Explorer to does not work when the right-click the DVD Video Camera drive icon and execute "Eject". DVD Video Camera is connected to PC. Reference page 50 148 138 161