Panasonic VDRD220 Dvd Camcorder - Page 101
The DISC EJECT lever, Is the memory of the disc or card full?
View all Panasonic VDRD220 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 101 highlights
Others Problem The DISC EJECT lever does not work. The disc cannot be read. A function indication such as the remaining time indication or the elapsed time indication is not shown. Recording does not start although power is supplied to this unit and the disc or card is correctly inserted. Recording starts but stops immediately. The playback picture breaks up for a moment. Recorded still pictures are not clear. Check points ≥ The disc cover will not open unless the unit is powered. # Connect a charged battery or AC adaptor. ≥ The DISC EJECT lever does not work when the unit is connected to the computer. (l 104) ≥ Are there fingerprints or dirt on the surface of the disc? # If there are fingerprints or dirt on the disc, wipe them off. (l 24) ≥ If you set [SETUP]>[DISPLAY]>[OFF], indications other than warnings and date indications disappear. ≥ Is the DVD-RAM or the DVD-RW (VR format) write-protected? # Release the protection. (l 75) If the DVD-RAM or DVD-RW (VR format) was protected on another device, release the protection on the same device. ≥ Has the DVD-RW (Video format) or DVD-R been finalized? # After finalizing, the discs become play-only and cannot record. If you un-finalize a DVD-RW (Video format), it can be used for recording. (l 75) ≥ Has the SD card's write protect switch been set to LOCK? # No recording is possible while the write protect switch is set to LOCK. (l 23) ≥ Is the memory of the disc or card full? # If the disc or card has no more available memory, free up some memory by deleting unnecessary scenes (l 64, 71) or use a new disc or card. ≥ Is the unit set to the video recording mode or picture recording mode? # No recording is possible unless the mode dial is at or . ≥ Is the disc cover open? # If the cover is open, this unit may not operate normally. Close the disc cover. ≥ Is the disc scratched or dirty? # Clean the disc. (l 24) If there are scratches on the disc, use a new disc. ≥ The unit is hot. Follow the messages on the display. To use the unit again, turn the unit off and leave it for a while. ≥ Are you trying to record small or finely detailed objects with [PICT.QUALITY] set at [ ]? # If you try to record small or finely detailed objects with [PICT.QUALITY] set at [ ], the images may break up into a mosaic-like pattern. Record with [PICT.QUALITY] set at [ ] instead. (l 47) 101 LSQT1146