Panasonic VDRM75PP Dvd Video Camera-oem - Page 37
Using Remote Controller, Viewing Subject Through Viewfinder
View all Panasonic VDRM75PP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
lUsing Remote Controller To operate the DVD Video Camera with the remote controller, point it at the infrared receiver before pressing buttons. If it does not work properly, do not forget to point it at the receiver to repeat the action. The remote controllable distance is up to 16 feet (5 m). Note: • When using the remote controller, make sure that the infrared receiver on DVD Video Camera is not exposed to direct sunlight or any intense light. If the infrared receiver is subject to light stronger than the infrared light from remote controller, the DVD Video Camera cannot be operated by remote controller. • If there is an obstacle between the remote control and infrared receiver on DVD Video Camera, remote control may not be possible. • Depending on the type of fluorescent lamp in the room, the remote controller may not work properly. Approx. 16 feet (5m) Infrared receiver Viewing Subject Through Viewfinder 1 Pull out the viewfinder. 2 Turn the diopter control knob to adjust the focus to suit your eyesight. Diopter control Caution: Do not lift the DVD Video Camera by holding the viewfinder or LCD monitor. If the viewfinder or LCD monitor comes off, the DVD Video Camera will fall. Pull out the viewfinder. Note: • If no image appears in viewfinder, refer to "Check 6" on page 150. • If the LCD monitor is open approximately 90°, the viewfinder will be off. • Focusing will not be correct unless the viewfinder is pulled out. • See "LCD/EVF Setup" (P.92) for information on displaying the viewfinder image regardless of whether the LCD monitor is open or closed. 37