Panasonic VDRM75PP Dvd Video Camera-oem - Page 38
Viewing Image on LCD Monitor Screen, Range of LCD monitor movement
View all Panasonic VDRM75PP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
Viewing Image on LCD Monitor Screen 1 Open the LCD monitor. The LCD monitor has a spot where you can hook your finger. Hook the finger there to open the monitor. Note: • See "LCD/EVF Setup" (P.92) for information on displaying the viewfinder image regardless of whether the LCD monitor is open or closed. lRange of LCD monitor movement The LCD monitor can be opened up to approximately 90°. If the LCD monitor is open 90°, the screen can be tilted down by as much as 90°, and can also be tilted up and turned up to 180° so the screen faces in the same direction as the lens. If the LCD monitor is turned 180° so the screen faces in the same direction as the lens during recording, subject image will also appear in the viewfinder as a mirror image (left/right reversed). Tilt the LCD monitor to adjust its vertical angle so that you can easily see the screen . Note: • If no image appears on LCD monitor screen, refer to "Check 7" on page 150. • Be sure to open the LCD monitor approximately 90° before changing its vertical angle. • Do not record for a prolonged time with the LCD monitor facing outside in close contact with the DVD Video Camera body (see diagram, right): Doing this could cause the DVD Video Camera and LCD monitor to become hot. Grab the bottom with your finger and pull it out. 90° 180° 38