Panasonic WJND200 WJND200 User Guide - Page 11
About the Network Security of this Unit, Equipped security functions, For enhanced security
![]() |
View all Panasonic WJND200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
About the Network Security of This Unit Equipped security functions q Access restrictions by the host authentication and the user authentication It is possible to restrict users from accessing this unit by setting the host authentication and/or the user authentication to on. ( page 65) w Access restrictions by changing the HTTP port It is possible to prevent illegal access such as port scanning, etc. by changing the HTTP port number. ( page 55) For enhanced security Divide the subnet using a router to enhance the network security by double authentications of IP addresses using this unit and a router. When required to connect this unit with a network without enhanced security, connect the unit after the network security is enhanced, such as by installing a VPN (Virtual Private Network) device, etc. Important: The settings of the unit will be different depending on the settings of the LAN or the Internet service provider to which the unit is to be connected. Refer to an administrator of each network for further information about the respective network. [Connection example] IP address: 192.168.1.1 Subnet mask: 255.255.255.0 Router WAN* Router IP address: 192.168.0.1 Subnet mask: 255.255.255.0 IP address: 192.168.1.100 Subnet mask: 255.255.255.0 Default gateway: 192.168.1.1 * Wide Area Network IBM PC/AT compatible SIGNAL GND 10/100BASE-T ALARM ALARM/CONTROL ON IP address: 192.168.0.250 OFF AC IN POWER Subnet mask: 255.255.255.0 This unit Default gateway: 192.168.0.1 Installing a firewall to use the packet filtering and the protocol filtering functions can better enhance the network security. [Connection example] Firewall IP address: 192.168.1.1 Subnet mask: 255.255.255.0 Router WAN* Router IP address: 192.168.0.1 Subnet mask: 255.255.255.0 IP address: 192.168.1.100 Subnet mask: 255.255.255.0 Default gateway: 192.168.1.1 * Wide Area Network IBM PC/AT compatible IP address: 192.168.0.250 Subnet mask: 255.255.255.0 Default gateway: 192.168.0.1 Switching hub 10/100BASE-T ALARM ALARM/CONTROL This unit SIGNAL GND AC IN ON OFF POWER 11
![](/manual_guide/products/panasonic-wjnd200-wjnd200-user-guide-de05250/11.png)