Panasonic WJND200 WJND200 User Guide - Page 29
Important, Program Setup, series/WV-NP1000 series/WV-NS202/WV-NF284
View all Panasonic WJND200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
In this case, check the IP address setting and register the other IP address for the camera manually. • When "Register the IP address set with a detected camera" is selected and the DHCP setting of the detected camera is "ON", the unit will automatically set the DHCP setting of the camera to "OFF" and give a new IP address to the camera. • "Register the IP address automatically given by this unit to a detected camera" is available only when "OFF" is set for the DHCP settings of the unit. • Before selecting "Register the IP address automatically given by this unit to a detected camera", set the subnet of the network port to "255.255.255.0". • The following cameras are compatible with the "Camera Auto Registration" function. WV-NM100/WV-NS32x/WV-NW47x/WV-NP244 series/WV-NP1000 series/WV-NS202/WV-NF284/ WJ-NT304/WV-NW484 • When the IP address is registered to the camera, the HTTP port of the camera will automatically set to "80", and the same subnet and the gateway of the unit will be set to the camera. • When the same IP address is used for the other camera, the IP address and the MAC address will be displayed in red on the "Camera Search Result" window ( page 48). Make sure that the same IP address is used for two cameras or more. Important: When selecting "Register the IP address automatically given by this unit to a detected camera", the unit will give IP addresses to all of the detected cameras. Before selecting "Register the IP address automatically given by this unit to a detected camera", make sure that there is no camera that is to be used with the unique IP address. Program Setup The program setting window will be displayed when the [View] button is clicked after selecting a program from the pull-down. Refer to page 40 for further information about the "Program Setup" window. 29