Panasonic WJND200 WJND200 User Guide - Page 42
About the SD memory recording, Important, Notes
View all Panasonic WJND200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
About the SD memory recording The SD memory recording is the function of some Panasonic's cameras that saves images on the SD memory card on the camera when communication with the camera failed in the period set for the schedule recording of this unit. Applicable cameras/firmware versions • WV-NP244 series: Ver.1.20 or later • WV-NP1000 series: Ver.1.20 or later • WV-NS202: Ver.1.00 or later • WV-NF284: Ver1.00 or later • WJ-NT304: Ver1.00 or later • WV-NW484: Ver1.00 or later For example, when "0.1 ips" is selected, the camera will start the SD memory recording when no request for image obtainment from the unit is made for 10 seconds or more (equivalent to 0.1 ips*) in the time range of the set schedule. * The wait time to start the SD memory recording of the camera differs depending on the set recording rate. There are two ways to obtain recorded images from the SD memory card; automatic obtainment by setting schedules and manual obtainment by clicking the SD memory data obtain button. When time length between the set schedules is longer than 30 minutes, images recorded by the SD memory recording will be obtained automatically. All users will forcibly be logged out when automatic obtainment starts. To obtain SD memory data automatically, set time length between the schedules longer than 30 minutes. Refer to the operating instructions (PDF) for how to obtain images manually. Important: • The emergency recording will be performed at the recording rate set for "SD MEMORY REC" on the "Emergency REC" page ( page 34) when communication with the camera failed during the emergency recording. • The SD memory recording will not be performed if communication with the camera is not established even when it reached the start time of the schedule or when the emergency recording is triggered. • Do not set the recording rate of the SD memory recording for the same camera with multiple recorders. • Synchronize the clock of the recorder and the cameras using the NTP function, etc. and set the "Daylight saving (Summertime)" setting to "OFF". When they are not synchronized and have different time clocks, the SD memory recording may not work. • The recording time of SD memory data will be displayed based on the clock of the camera. Notes: • All images recorded on the SD memory card may not always be obtained at a time depending on the time length between the schedules or the total size of the images. Images failed to obtain can be obtained automatically next time. • SD memory data cannot be obtained automatically when the following is being performed: • Playback • HTTP download • Emergency recording • External recording • SD memory data obtainment will be interrupted when the following operation is performed: • Login • Emergency recording • External recording • Shifting to/from summertime (daylight savings) 42