Panasonic WJND200 WJND200 User Guide - Page 28

Setup items Language Select the display language for the web browser from the following. JAPANESE/ENGLISH Time & Date Adjust the current time and date. Select numbers for year, month, day, hour and minute, and click the [SET] button. Important: • Recording will not be performed for around 4 sec- onds just after applying the time and date settings. • Live images will turn to black screen and recording will not be performed for around 4 seconds just after applying the time and date settings even by shifting to/from summertime (daylight savings). Port Setup Perform the settings for the following items for each port. [DHCP] Select ON or OFF to determine whether or not to use the DHCP server. Select "ON" to obtain an IP address, a subnet mask and a gateway from the DHCP server. Set to "OFF" when entering the addresses above manually. ON: Uses the DHCP server. OFF: Does not use the DHCP server. Important: A different subnet should be set for each port. [IP Address] When "OFF" is selected for "DHCP", enter an IP address. For this unit, enter 4 units from the decimal numbers (0-255) according to the network configuration. [Subnet Mask] Enter a subnet mask according to the network configuration when OFF is selected for "DHCP". [Gateway] Enter the IP address of the gateway according to the network environment when "OFF" is selected for "DHCP". [Line Speed] The following are available for "Line Speed". AUTO: Line speed will be applied automatically. 10-HALF: 10 Mbps semi duplex 10-FULL: 10 Mbps full duplex 100-HALF: 100 Mbps semi duplex 100-FULL: 100 Mbps full duplex Note: When the setup menu is closed after changing the line speed, the unit will automatically restart. Camera Auto Registration The unit will search cameras and register the detected cameras automatically. Determine how to register IP addresses of cameras. Register the IP address automatically given by this unit to a detected camera: When a camera is detected, the unit will give an IP address to the detected camera and register it. Register the IP address set with a detected camera: When a camera is detected, the unit will register the IP address of the detected camera. Notes: • When "Camera Auto Registration" is carried out, the other login users will be forcibly logged out. • Recordings currently being carried out on this unit will stop in the process of "Camera Auto Registration". • "Camera Auto Registration" is unavailable for cameras on a different subnet. • Depending on the camera model, the unit cannot detect them for their security when 20 minutes have passed after the power of the camera is turned on. Refer to the operating instructions of the camera for further information. • The image compression method of the registered camera will automatically be set to "JPEG" or "MJPEG". • When selecting "Register the IP address automatically given by this unit to a detected camera", the unit will automatically find an unused IP address and set it to the detected camera. However, depending on the network environment, the set IP address may be already used for the other network device such as when using the firewall function of Windows®. 28