Panasonic WJND200 WJND200 User Guide - Page 63
Settings for mail notification [Mail Setup], Setup items, Step 1, Attach Alarm Image, Default, Notes
View all Panasonic WJND200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
Settings for mail notification [Mail Setup] Perform the settings relating to the alarm mail function and the warning report mail function (refer to the Operating Instructions (PDF)). Screenshot 1 Click the [Comm] button in the "Setup" panel and then click the "Mail Setup" tab. The "Mail Setup" page will be displayed. Step 1 Perform the settings for each item. Refer to the following for further information about the settings for each item. Step 2 Click the [SET] button after completing the settings. Setup items Attach Alarm Image Select "ON" or "OFF" to determine whether or not to attach an image to an e-mail to be sent at an event occurrence. Default: OFF POP before SMTP Select "ON" or "OFF" to determine whether to enable or disable the POP server authentication before sending emails using the SMTP server. When "ON" is selected, perform the following settings. Notes: • When the image compression method of the camera used for a camera channel where an event occurred is "MPEG-4", the image will not be attached. • Even "ON" is selected, the image will not be attached when "OFF" is selected for the recording rate of the event recording. Mail Server Address Enter an IP address or a name of the SMTP server to send e-mails to. To enter an SMTP server name, it is necessary to select "MANUAL" or "AUTO" for "DNS". Enter up to 255 alphanumeric characters including hyphens (-) and periods (.). POP Server Address Enter the IP address of the POP server or the POP server name. Enter up to 255 alphanumeric characters including hyphens (-) and periods (.). USER ID Enter a user ID (login name) to access the POP server. Enter up to 32 alphanumeric characters. The available characters are the characters listed below except (&) and blank (space). Password Register a password to access the POP server. Enter up to 32 alphanumeric characters. The available characters are the characters listed below except (&) and blank (space). An entered character for the password will be displayed as "*" or "•". 63