Panasonic WJND200 WJND200 User Guide - Page 61
Settings for the FTP server [FTP Setup], Setup items, Step 1, FTP Server Address, User Name
View all Panasonic WJND200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
Settings for the FTP server [FTP Setup] Settings for transmitting images from a camera connected to this unit to a designated FTP server periodically can be performed with the "FTP Setup" menu. Screenshot 1 Click the [Comm] button in the "Setup" panel and then click the "FTP Setup" tab. The "FTP Setup" page will be displayed. Step 1 Perform the settings for each item. Refer to the following for further information about the settings for each item. Step 2 Click the [SET] button after completing the settings. Setup items FTP Server Address Enter an address or name of the FTP server as a destination of images. To enter an FTP server name, it is necessary to select "MANUAL" or "AUTO" for "DNS". Enter up to 255 alphanumeric characters including hyphens (-) and periods (.). User Name Enter a user name (login name) to access the FTP server. Enter up to 32 alphanumeric characters. The available characters are the characters listed below except (&) and blank (space). User Password It is necessary to register a password when sending images to the FTP server. Enter up to 32 alphanumeric characters listed on the next page. An entered character for the password will be displayed as "*" or "•". Mode Select a mode for sending images to the FTP server. Change to "PASSIVE" when sending images is difficult with "ACTIVE". Default: ACTIVE [FTP Send by Periodic Timer] Perform the following settings to periodically transmit live images. Perform the settings to determine whether or not to transmit live images to the FTP server using the timetable ( page 45). Server Directory Enter a directory of the server. Enter up to 255 alphanumeric characters. The available characters are the characters listed on the next page except blank (space)). File Name Perform the settings for the rules about the file name to be sent. Select whether to "TIME & DATE BASE" or "SERIAL NUMBER". Default: TIME & DATE BASE Interval Enter a number for transmission interval. Enter a number (1 - 1440) for transmission interval, and select whether it will be "s" (seconds) or "m" (minutes) for the interval unit. Default: 1 s 61