Panasonic WV-CS954 Operating Instructions - Page 18

Connections - installation

Get Panasonic WV-CS954 PDF manuals and user guides View all Panasonic WV-CS954 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 18 highlights

CONNECTIONS Precautions • The following connections should be made by qualified service personnel or system installers in accordance with all local codes. • See the reverse side of the cover page for main lead connection. 24 V AC 24 V AC Cable for camera RS485 Data Port Twisted Pair Cable*1 (RJ-12) Video Output Connector Coaxial Cable (5C-2V)*2 (BNC) Alarm Input Connector 8P Alarm Cable (provided) To Matrix Switcher, etc. To VIDEO IN port (CAMERA IN) To sensor, etc. Alarm Output Connector PP Alarm Cable (provided) To buzzer, display device, etc. *1: For twisted pair cable, use shielded low-impedance cable with a thickness of at least AWG#22 (0.33 mm2). *2: Keep the overall length of coaxial cable under 1200 meters (in the case of 5C-2V). *3: Be sure to connect the grounding cable to ground. RS485 Data Port Data Tx Data Rx Red Orange Yellow Green (RJ-12) T(B) T(A) R(B) R(A) Alarm Input Connector Alarm In 1 (Black) GND (Brown) Alarm In 2 (Red) GND (Orange) Alarm In 3 (Yellow) GND (Light Blue or Green) Alarm In 4 (Blue) GND (Violet) Alarm Output Connector Alarm Out 1 (Gray) GND (White) Alarm Out 2 (Pink) GND (Light Green or Light Blue) Alarm In/Out Ratings Alarm In : 5 V DC pull-up input. Drive capacity of at lease 0.2 mA required. OFF : 4 V DC minimum 5 V DC maximum, or open ON : 1 V DC maximum or short Alarm Out : Open collector output. 16 V DC, 100 mA maximum drive capacity OFF : Open ON : 100 mA maximum * When connecting to an external device, set up the system so the ratings are not exceeded. Note: Do not turn off camera power within 30 seconds after turning it on. Doing so can cause pan, tilt, zoom, or focus to go out of position. • 24 V AC Power Supply Connection Recommended wire gauge sizes for 24 V AC line Copper wire size #24 #22 #20 #18 (AWG) (0.22mm2) (0.33mm2) (0.52mm2) (0.83mm2) Length (m) 20 of cable (approx.) (ft) 65 30 45 75 100 160 260 Accessory Connector Information Pin no. Power source 1 24 V AC LIVE 2 24 V AC NEUTRAL 3 Ground 4 Not use 43 21 -18-

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
Pin no.
Power source
1
2
3
4
24 V AC LIVE
24 V AC NEUTRAL
Ground
Not use
CONNECTIONS
-18-
Coaxial Cable (5C-2V)*2
24 V
AC
24 V
AC Cable for camera
RS485 Data Port
To VIDEO IN port
(CAMERA IN)
8P Alarm Cable (provided)
PP Alarm Cable (provided)
To sensor, etc.
To buzzer,
display device, etc.
To Matrix Switcher,
etc.
Video Output
Connector
Alarm Input
Connector
Alarm Output
Connector
Twisted Pair Cable*1
(BNC)
(RJ-12)
RS485 Data Port
Alarm Input Connector
Alarm Output Connector
T(B)
T(A)
R(B)
R(A)
Red
Orange
Yellow
Green
Data
Tx
Data
Rx
(RJ-12)
Alarm In 2 (Red)
Alarm In 1 (Black)
GND (Brown)
Alarm In 3 (Yellow)
Alarm In 4 (Blue)
GND (Orange)
GND (
Light Blue or Green
)
GND (Violet)
Alarm Out 2 (Pink)
Alarm Out 1 (Gray)
GND (White)
GND (Light Green
or Light Blue)
*1:
For twisted pair cable, use shielded low-impedance cable with a thickness of at least AWG#22
(0.33 mm
2
).
*2:
Keep the overall length of coaxial cable under 1200 meters (in the case of 5C-2V).
*3:
Be sure to connect the grounding cable to ground.
Alarm In/Out Ratings
Alarm In
:
5 V DC pull-up input. Drive capacity of at
lease 0.2 mA required.
OFF :
4 V DC minimum 5 V DC maximum,
or open
ON
:
1 V DC maximum or short
Alarm Out
:
Open collector output. 16 V DC, 100 mA
maximum drive capacity
OFF :
Open
ON
:
100 mA maximum
* When connecting to an external device, set up the
system so the ratings are not exceeded.
Note:
Do not turn off camera power within 30 seconds
after turning it on. Doing so can cause pan, tilt, zoom,
or focus to go out of position.
Precautions
• The following connections should be made by qualified service personnel or system installers in accordance
with all local codes.
•
See the reverse side of the cover page for main lead connection.
#24
(0.22mm
2
)
Copper wire size
(AWG)
Length
of cable
(approx.)
(m)
(ft)
#22
(0.33mm
2
)
#20
(0.52mm
2
)
#18
(0.83mm
2
)
20
30
45
75
65
100
160
260
• 24 V AC Power Supply Connection
Recommended wire gauge sizes for 24 V AC line
Accessory Connector Information
1
3
2
4