Panasonic WV-CS954 Operating Instructions - Page 29

PRESET NO. 1* 0123456789 ABCDEFGHIJKLM NOPQRSTUVWXYZ SPACE COPY POSI RET RESET DOOR............ To copy the preset ID of another position number Move the cursor to COPY, and then press the CAM (SET) button. This displays the preset ID of the position number preceding the one you are currently configuring. Each press of the CAM (SET) button scrolls back to the next sequential position number and displays its preset ID. ● Light Control (ALC/MANUAL) See page 22 and 23 for information on the setting method. You can adjust the lens iris setting on the detailed menu when MANUAL is set. ● Auto Focus (AF MODE) 1. Move the cursor to AF MODE, and then tilt the joystick left or right to select an auto-focus function setting. MANUAL S.M.L : Auto focus does not operate after moving to a preset position. AUTO S.M.L : Auto focus operates after moving to a preset position. ● Sequence/Sort DWELL Time (DWELL TIME) This section explains how to set the length of time the camera stops (time it stops rotating) and tapes the scene while in the various preset positions for the sequence and sort operations (page 30, 31). 1. Move the cursor to DWELL TIME, and then tilt the joystick left or right to select a DWELL time setting. Tilting the joystick cycles through the stop time display in the sequence shown below. (unit: sec, min) 2S ↔ 3S ↔ 5S ↔ 10S ↔ 30S ↔ 1MIN 4MIN ↔ 3MIN ↔ 2MIN PRESET NO. 1* POSITION SET PRESET ID ON ALC/MANUAL ALC AF MODE MANUAL L DWELL TIME 10S SCENE FILE OFF PRESET SPEED I L H RET TOP DEL ● Scene File Setting (SCENE FILE) Up to 10 scene files, each of which contains camera settings for a specific location (scene), can be stored in memory. Scene files are managed using scene file numbers from 1 through 10, and can be selected when configuring preset position settings. The following procedures explain how to select a scene file and how to configure scene file settings. (1) Selecting a Scene File Use this procedure when you want to apply the settings of a previously stored scene file when you are configuring the settings of a preset position. PRESET NO. 1* POSITION SET PRESET ID ON ALC/MANUAL ALC AF MODE MANUAL L DWELL TIME 10S SCENE FILE 1 PRESET SPEED I L H RET TOP DEL 1. Move the cursor to SCENE FILE, and then tilt it left and right to select the number of the scene file you want to select. (2) Configuring Scene File Settings 1. Move the cursor to SCENE FILE, and then tilt it left and right to select the number of the scene file whose settings you want to configure. **SCENE FILE 1** SHUTTER OFF AGC ON(MID) SENS UP OFF WHITE BAL ATW1 MOTION DET OFF RET TOP 2. Press the CAM (SET) button. This will display the scene file setting menu. The following items can be set on the Scene file settings menu. See camera settings for details on each setting. • SHUTTER (page 23, 24) • AGC (page 24) • SENS UP (page 24) • WHITE BAL (page 25) • MOTION DET (page 36) ● Preset Speed Setting (PRESET SPEED) Set the speed the camera moves to the various preset positions for the sequence and sort operations (page 30, 31). 1. Move the cursor to PRESET SPEED, and then tilt the joystick left or right to change the speed setting. Shifting the setting towards the L side decreases the speed, while shifting towards the H side increase it. PRESET NO. 1* POSITION SET PRESET ID ON ALC/MANUAL ALC AF MODE MANUAL L DWELL TIME 10S SCENE FILE OFF PRESET SPEED I L H RET TOP DEL -29-