Panasonic WV-CS954 Operating Instructions - Page 8

■ Downloading (saving) or uploading (recovering) camera setting information Camera setting information that can be downloaded to the system controller etc, includes existing preset position settings and menu settings. However, the following items are not included. • Patrol function (page 32) • Area title function (page 34) • Blemish compensation pattern (page 39) • RS485 settings (page 20) • Password settings (page 42) Make sure that the functions listed below are all turned off before downloading camera preset data to the system controller etc. or uploading downloaded data to the camera. Download or upload will not end normally if it is performed while any of these functions are turned on. • Alarm (page 37) • Preset Alarm (page 37) • Cleaning (page 35) • Motion Detector (page 36) • Auto Mode (page 30) • Self Return (page 30) When downloading or uploading preset data, aim the camera at a wall or similar object so there is as little movement as possible on the screen. Uploading of WV-CS954 preset data to other models (e.g. WV-CS854, WV-CS854A, WV-CS854B and WVNS324) may cause an error and failure of the uploading process. ■ Self-diagnosing Function If abnormal operation due to external noise or some other reason continues for more than 30 seconds, the camera will automatically reset itself and restore normal operation. Reset operation the same initialization routine that is performed when the camera is turned on. If the reset is required too often, it could mean that the camera is installed in a location where there is a large amount of external noise. This can cause malfunction of the camera, so you should contact a qualified service person or system installer as soon as possible. -8-