Panasonic kx-tg2267 2.4 Ghz Cordles Phon - Page 47

Listening to Voice Mail Messages After the voice mail box having received messages, the unit will indicate it in two ways: (a) "Voice mail" with the line(s) which received message(s) displayed on the handset, and (b) the VM indicator on the base unit will flash. Ex. Line 1 received message(s). Voice mail 1 To listen to your voice mail message(s), follow the steps below. 1 Press (FLASH/CALL!WAIT/VOICE!MAIL). •The line(s) which received message(s) will flash. 2 Press the line button which received messages. •The unit is connected to the telephone line and dials the access number (p. 44). 3 Follow the pre-recorded instructions. Voice mail LINE1 LINE2 [L1] H=Mute 1234567PPP8901 4 When finished, press (OFF). •If "Voice mail" still remains on the display or the VM indicator still flashes even if you have listened to your voice mail message(s), press (HOLD/FUNCTION/CLEAR), and press and hold (HOLD/FUNCTION/CLEAR) until the unit beeps. "Voice mail" will disappear and the VM indicator will turn off. •If your voice mail service uses a voice mail tone and the recorded message is over 3 minutes long, "Voice mail" may not be displayed and the VM indicator may not flash. •If your voice mail service uses a voice mail tone, the tone will be heard from any parallel connected phone. If you use another phone to retrieve messages, you have to dial your access number manually. Advanced Operation For assistance, please call: 1-800-211-PANA(7262) 47