Panasonic kx-tg2267 2.4 Ghz Cordles Phon - Page 62

Troubleshooting Problem Cause & Remedy You cannot program items, such as the dialing mode. •Programming is not possible while the unit is in the talk or speakerphone mode, when viewing the Caller List/directory list. •Do not pause for over 60 seconds while programming. •Move closer to the base unit or á may have been pressed when you picked up the handset. Press (OFF) and try again. Previously programmed information is erased. •If a power failure occurs, programmed information may be erased. Reprogram if necessary. You cannot store a name and •You cannot store an item in the phone number in the directory while the unit is in the talk or directory. speaker mode. •Do not pause for over 60 seconds while storing. While programming or searching, the unit starts to ring and stops the program/ search. •To answer the call, press , or the called line button. Start again from the beginning after hanging up. During the conversation, the other line status indication flashes quickly and the display shows another caller's information. •Someone is calling you on the other line. To answer, press (HOLD/FUNCTION/CLEAR) to put the current call on hold. Press the line button whose status indication is flashing quickly on the display (p. 48). The unit does not display the caller's name and/or phone number. •You need to subscribe to a Caller ID service. •Other telephone equipment may be interfering with your phone. Disconnect it and try again. •Other electrical appliances connected to the same outlet may be interfering with the Caller ID information. •Telephone line noise may be affecting the Caller ID information. 62