Panasonic kx-tg2267 2.4 Ghz Cordles Phon - Page 61
Troubleshooting - charging problem
View all Panasonic kx-tg2267 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
Troubleshooting Problem Cause & Remedy The unit does not work. •Check the settings (p. 11-17). •Check whether the dialing mode setting is correct (p, 16). •Charge the battery fully (p. 14). •Clean the charge contacts and charge again (p. 15). •Install the battery properly (p. 14). •Place the handset on the base unit and unplug the AC adaptor to reset. Plug in, and try again. •Re-install the battery and place the handset on the base unit (p. 59). Try again. "No link to base Place on cradle and try again." is displayed and an alarm tone sounds. •You are too far from the base unit. Move closer and try again. •Place the handset on the base unit and try again. •Plug in the AC adaptor. •Raise the base unit antenna. Static, sound cuts in/out, •Locate the handset and the base unit fades. Interference from other away from other electrical appliances electrical units. (p. 3). •Move closer to the base unit. •Raise the base unit antenna. •Press Ü to select a clearer channel in the talk or speakerphone mode. The unit does not ring. •The ringer volume is set to OFF. Set to HIGH or LOW (p. 20). The line status indications do •Check the settings (p. 11-17). not work properly. •The line mode selection is incorrect. See page 17. The handset display is blank. •Charge the battery fully (p. 14). Useful Information For assistance, please call: 1-800-211-PANA(7262) 61