Pantech Link II Manual - English and Spanish - Page 17
Charging your battery - charger
View all Pantech Link II manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Put the contacts of the battery into the hole located at the bottom of the unit. Insert and press the upper side of the battery until you hear the "click". Make sure you align the gold contacts at the battery end with contacts on the phone. If the contacts at the battery are not properly aligned, damage could occur to the phone and the battery. 3. To remove the battery, push the bottom of the battery to upwards and remove the battery. To remove the SIM card, slide the SIM card in the direction of the arrow as shown. 4. To fit the battery cover, put it on the guide rail and push up. Charging your battery 1. To charge, connect the charger adapter as shown right. Make sure you align the connector as shown right. If not, it will damage the charging connector on the phone and will not charge. 2. To remove the adapter connection, pull the adapter away as shown right. 01 02 03 04 05 06 07 08 17