Pentax IQZoom 280P IQZoom 280P Manual - Page 27
Consecutive, Photography
![]() |
View all Pentax IQZoom 280P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
CONSECUTIVE PHOTOGRAPHY Notes on the self-timer shooting • To cancel the self-timer at any time after it's been activated, push the main switch. In this instance, the power will not be turned off. • When you want to use the flash with the self-timer, ensure that the red lamp is lit indicating the flash has been charged before operating the self-timer. • If the batteries are exhausted, the self-timer operation may not be completed once started. In this case, replace the batteries. • When the Bulb mode is used in combination with the self-timer, a shutter speed of approx. 1/2 sec. is automatically selected. AUTO • IEX Depress the drive button until the (Q) symbol appears on the LCD panel. While the shutter release button is held down, a frame is shot every 1.6 sec. The camera focuses on the subjects frame by frame in this mode, so make sure to keep the autofocus frame on the subject. • When using flash in this mode, consecutive shooting is possible only after the flash is charged (the red lamp is lit) following each exposure. • Consecutive shooting mode does not work in the Bulb mode: use the Bulb-Timer mode if you wish to take consecutive pictures in the Bulb mode. 23
![](/manual_guide/products/pentax-iqzoom-280p-iqzoom-280p-manual-dba8d92/27.png)