Pentax IQZoom 280P IQZoom 280P Manual - Page 49
Symptoms, Causes, Remedies
![]() |
View all Pentax IQZoom 280P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
Symptoms Causes and Remedies 4. The Remote Control does not operate. 5. The flash discharges, though it is not dark. 6. The (H) or (0) mark is displayed on the LCD panel. 7. On the DATE model, the data does not appear on the picture. • The operable distance of the Remote Control is approx. 5m from the front and approx. 0.7m from the back of the camera. (See page 36.) • The Remote Control may not operate in a backlit situation. (See page 36.) • The flash discharges automatically in a backlit situation. (See page 13.) • If either mark disappears when the zoom lever is moved, the camera is ready for use. The camera may be defective if either mark appears often. • If the picture is taken in the panoramic format, the data is imprinted on the film but is not printed on the picture. The correct camera-to-subject distances when shooting using flash with films other than ISO 100, 200 or 400 are indicated in the table below. Lens ISO 25 -, 60 ', 1000 1600 3200 28mm ($$4) 0.56-2.5m 0.56-3.5m 1. 4(* )-16m 1.7(*)-20m 2.5(*)-28m 80mm (4) 0.56-1.3m 0.56-1.9m 0.65-8.4m _ 0.8(*)-11.6m 1.1(*)-15m * With high speed film overexposure may occur at close range due to the film's high speed. 45
![](/manual_guide/products/pentax-iqzoom-280p-iqzoom-280p-manual-dba8d92/49.png)