Pentax PZ-70 PZ-70 Manual - Page 23
Loading
View all Pentax PZ-70 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
BASIC OPERATION (PREPARATION) (6) FILM LOADING We suggest that first you operate the camera with no 1 2 film loaded to become familiar with its operation. // Automatic film speed setting This camera is designed to use DX-coded films with ISO rating from 25 to 5000. • When the DX-coded film is used, the correct film speed is automatically set for the camera. • If you use a non-DX coded film, the camera automatically sets the film speed to ISO 100. • Before loading a film for the first time after purchase, open the back cover and remove the protective card. DO NOT TOUCH THE SHUTTER CURTAINS. r, t 0 0 Li 7J (3 El El 0 diallINS 1. To open the back cover, slide the back cover release lever in the direction of the arrow. 2. Hold the film cartridge with the protruding end down. Slide the top end in the film chamber first and then push its protruding end in. • Always load or unload a film in the shade or by using your body to shade the camera. 19