Pentax PZ-70 PZ-70 Manual - Page 76
SNOIlVind0, O3ONVAOV
View all Pentax PZ-70 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
(8) USING A PENTAX DEDICATED EXTERNAL FLASH If the built-in flash is not powerful enough, a Pentax dedicated external flash should be used. Using the TTL Auto Flash 1 . Remove the hot shoe cover FF and attach a Pentax dedicated flash unit. 2. Turn ON the flash. 3. Set the flash to the TTL Auto Mode. 4. Ensure that the flash is fully charged. 5. Focus on the subject and take a flash photograph. • When the flash is fully charged, the ready lamp on the flash unit lights up. When the shutter release button is depressed halfway down, I 7 appears in he viewfinder indicating the flash is ready to discharge. • Using the dedicated flash in each exposure mode is the samme manner as use of the built-in flash, see page 67 to 71 . Multi-burst flash with the Pentax dedicated flash When discharging more than 2 Pentax dedicated flashes, make sure that they are the same type of the flashes (refer to the overview of Flash Function on page 73.), combine the Type B with Type C or Type D with Type E. The built-in flash can be operated with any type of Pentax TTL dedicated flash unit. SNOIlVind0 O3ONVAOV II 72