Pentax PZ-70 PZ-70 Manual - Page 36
Autofocusing
View all Pentax PZ-70 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
(6) AUTOFOCUSING (ON1100HS) NOI1V83dO OISV9 I Set the focus mode switch to AF. . 1. Center the autofocus frame IC 3 over the main sub- ject. When the shutter release button is depressed halfway down, the lens automatically focuses. 2. When the subject is in focus, the focus indicator 0: lights up with the audible PCV signal. • When the shutter release button is depressed halfway down, the shutter speed and aperture setting are displayed in the viewfinder and the LCD panel. • When Li blinks in the viewfinder and the LCD panel, the use of the built-in flash is recommended. For more details on the built-in flash, see page 35. • The audible PCV signal can be turned off. See details on page 66. • During an autofocus operation, the focusing ring should not be obstructed with your fingers, hands, or any other objects. The focus indicator [01 blinks when the camera is not able to obtain proper focus for one of the following reasons. The subject is too close. Adjust the camera-tosubject distance. 2 The subject is difficult to autofocus. See "HARD-TO- AUTOFOCUS" on page 45.