Pentax PZ-70 PZ-70 Manual - Page 24
perforations
View all Pentax PZ-70 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
BASIC OPERATION ( PREPARATION ) 3 4 0 000 00 I eo 00 0 0000 0 00 00000.0.•. 000000000000000 3. As shown in the illustration, pull the film leader out far enough from the cartridge to reach the take-up spool. THE SHUTTER CURTAINS ARE FINE-PRECISION MATERIAL. DO NOT TOUCH THEM WITH YOUR FINGERS OR ANY OTHER OBJECT WHILE LOADING FILM. • If you have pulled out too much film, push it back into the cartridge to reduce the slack. • The DX information pins in the film chamber are used to read film speed. Keep them clean and free from scratches. To remove smudges, wipe gently with a soft, dry cloth. 4. Align the film leader with the film leader end mark 0 as shown. • Make sure that the film perforations properly engage with the sprocket teeth 0 . • The shutter curtains are fine-precision material. Do not touch them with your fingers or any other object while loading film. • If the film leader is extremely bent, straighten it or cut off the bent portion.