Pentax efina AF50 efina AF50 Manual - Page 12
Saving Mode
View all Pentax efina AF50 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
5. Following each shot, the film will advance to the next frame automatically and counter will increase by one in sequence. Shooting with no film cartridge inside, Auto-Focus setting, Shutter Releasing and Auto Flash will function normally but motor will not run. Setting The Film Speed • This camera is designed to use standard APS film. Film with speeds from ISO100 to ISO400 are recommended to use. • The camera will be set to the correct film speed automatically by identifying the High or Low film speed indicator on the cartridge when dropped in. 11 Auto Battery Power Saving System • If the camera stays at power "ON" and is not operated for about 5 minutes, the whole system will be switched into Power Saving Mode automatically to save battery energy. • Camera will wake up once it receives input signal of Release Button or SelfTimer Button. Holding Your Camera (Fig. 6) 1. Always use both hands to steady your camera. 2. When holding the camera vertically always position it with the flash at the top. 3. Be careful not to place your fingers over the lens, flash, or auto-exposure metering sensor.