Pentax ist *ist Manual - Page 122
is displayed.
View all Pentax ist manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 122 highlights
120 USING EXTERNAL FLASH Using wireless High-speed sync flash with the AF360FGZ 1. Place the flash unit at the desired location. 2. Set the flash unit's power switch to [WIRELESS] 3. Set the flash unit's sync mode switch to HS (high-speed sync.). 4. Set the wireless mode switch to S (Slave). 5. Press the flash pop-up button to enable the built-in flash to be used. 6. Press the flash mode button until is displayed. 7. Confirm that both the built-in flash and external flash unit are fully charged. 8. Focus on the subject and take the picture. ✍ MEMO • When the built-in flash is ready (fully charged), the will light in the viewfinder when the shutter release button is pressed halfway down. • The high-speed sync is only available when the shutter speed is faster than 1/125 sec. • Read the operating manual of the flash unit for more details.