Pentax ist *ist Manual - Page 123
Wireless Flash AF360FGZ Only
View all Pentax ist manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 123 highlights
BASIC OPERATION (PREPARATION) BASIC OPERATION (SHOOTING) 121 Wireless Flash (AF360FGZ Only) With the AF360FGZ, you can discharge a flash without having a cord connection between the camera and flash unit. The highspeed sync mode can also be used with wireless flash. See page 120. 1. Place the flash unit at the desired location. 2. Set the flash unit's power switch to [WIRELESS] 3. Set the flash unit's sync mode switch to S (Slave). 4. Press the flash pop-up button to enable the built-in flash to be used. 5. Press the flash mode button until is displayed. 6. Confirm that both the built-in flash and external flash unit are fully charged. 7. Focus on the subject and take the picture. ✍ MEMO • When the flash is ready (fully charged), the will light in the viewfinder when the shutter release button is pressed halfway down. • Read the operating manual of the flash unit for more details. • The AF360FGZ can be attached directly to the camera hot shoe and used instead of the built-in flash. It can also be controlled in wireless mode. ADVANCED OPERATIONS OTHERS