Pentax ist *ist Manual - Page 62
When the picture is taken, the self-timer lamp lights for, approx. 2 seconds and will, begin
View all Pentax ist manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
60 SELECTING A DRIVE MODE 4 When the picture is taken, the self-timer lamp lights for approx. 2 seconds and will begin to blink slowly. Press the drive mode button after the picture is taken. The camera is released from remote control shooting mode and returns to singleframe drive mode. ✍ MEMO • The operating distance of the wireless remote control is approx. 5m from in front of 5m the camera. • Under exposure may occur if light enters the viewfinder during remote control shooting in any picture or exposure mode except manual exposure mode. Use the supplied viewfinder cap (see page 57) or AE lock function (see page 86). • To stop the remote control operation after it has been activated, press the drive button or turn the main/preview switch off. • If you want the camera to operate immediately (without a 3-second delay) after pressing the shutter release button on the remote control, use custom function number [CF13]. See pages 134 and 140. • The remote control may not operate in backlit conditions. • The remote control does not work while the flash is being charged. • When the remote control shooting mode is left unused for 5 minutes, the single-frame drive mode will be automatically set. • The built-in flash will not be popped up automatically in the remote control shooting mode. • See page 150 for the remote control specification.