Pentax ist *ist Manual - Page 156
the AF360FGZ
View all Pentax ist manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 156 highlights
[CF6] Superimposing the focus points 1 Superimposes the focus points 2 Disables the superimpose function [CF7] Enabling shutter release before the built-in flash is fully charged 1 Disables shutter release until the flash is ready 2 Enables shutter release before the flash is charged [CF8] Using the built-in flash as a wireless control for the AF360FGZ 1 Discharges the built-in flash to adjust the exposure 2 Built-in flash controls the AF360FGZ [CF9] Setting the flash pop-up button's function during wireless operation with the AF360FGZ 1 Disables the built-in flash 2 Discharges the built-in flash once for a test 3 Discharges the built-in flash consecutively for modeling [CF10] Setting the film rewind method 1 Automatically rewinds the film at the end of the roll 2 Disables automatic film rewind *To rewind the film, press the mid-roll rewind button. [CF11] Setting the status of the end of the film when rewound 1 Rolls up the film completely 2 Leaves the end of the film unwound [CF12] Setting the self-timer delay time 1 Self-timer delay of 12 sec. 2 Self-timer delay of 2 sec. with mirror lock-up [CF13] Setting the shutter release delay time with the remote control 1 Picture taken after 3 sec. 2 Picture taken immediately [CF14] Setting auto focusing during remote control operation 1 Auto focusing not used 2 Auto focusing used [CF15] Setting the LCD panel illumination 1 Illuminated when the main/preview switch is set to preview 2 Illuminated automatically in low light condition 3 Not illuminated [CF16] Setting the mode dial illumination 1 Illuminates 2 Does not illuminate [CF17] Enabling shutter release with the aperture ring set to other than the position 1 Disables shutter release if the aperture ring is not set to the position 2 Enables shutter release