Pfaff creative 2134 Owner's Manual - Page 26

Threading, Winding, Winding the bobbin from the spool pin

Get Pfaff creative 2134 PDF manuals and user guides View all Pfaff creative 2134 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 26 highlights

Winding the bobbin from the spool pin Place the sewing thread on the spool pin. Slide a spool cap firmly against the spool. Three different spools caps to accomodate any type of thread spool are included with your machine. Choose a spool cap that is the same size or slightly larger in diameter than the spool. C Threading Place the thread into guide A from the front and pull it counter clockwise around the pre-tension device B. Make sure the thread is pulled securely inside the pre-tension device for correct thread tension. Pull the thread under the thread guide C (from back to front). Wind the thread tail around the bobbin several times in a clockwise direction. Winding Turn on the machine. Hold the end of the thread firmly and press the foot control. As soon as the bobbin is full, the winding action will stop automatically. Push the bobbin to the left, cut the thread and remove the bobbin from the winder. Note: If you want to wind a bobbin before you start to embroider, you need to prepare the machine for embroidering, in the steps 1-6 as described on page 3:14, to be able to wind your bobbin. B A 2:8

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
2:8
A
C
B
Threading
Place the thread into guide A from the front and pull it counter clock-
wise around the pre-tension device B. Make sure the thread is pulled
securely inside the pre-tension device for correct thread tension. Pull
the thread under the thread guide C (from back to front). Wind the
thread tail around the bobbin several times in a clockwise direction.
Winding
Turn on the machine. Hold the end of the thread
fi
rmly and press the
foot control. As soon as the bobbin is full, the winding action will stop
automatically. Push the bobbin to the left, cut the thread and remove
the bobbin from the winder.
Note
: If you want to wind a bobbin before you start to embroider, you need
to prepare the machine for embroidering, in the steps 1-6 as described on
page 3:14, to be able to wind your bobbin.
Winding the bobbin from the spool pin
Place the sewing thread on the spool pin. Slide a
spool cap
fi
rmly against the spool. Three different
spools caps to accomodate any type of thread spool
are included with your machine. Choose a spool cap
that is the same size or slightly larger in diameter
than the spool.