Pfaff creative 2134 Owner's Manual - Page 30
thread must be pulled into the take-up lever
View all Pfaff creative 2134 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Threading your creative 2134 Raise the presser foot. Place the thread on the spool pin and fit a spool cap, either the same size or slightly larger than the spool, on top of the spool. Using both hands, pull the thread into thread guide A from the front. Place the thread from right to left into the pretension guide B. B A Now pass it through the left threading slot downwards through the left-hand side of the tension disk. Pull the thread around the stop C and into the right threading slot and upwards to the take-up lever. The thread must be pulled into the take-up lever from left to right. Pass the thread downwards in the righthand threading slot. Pull the thread from the side behind one of the two thread guides D. C D 2:12
2:12
A
B
C
D
Threading your creative 2134
Raise the presser foot. Place the thread on the spool
pin and
fi
t a spool cap, either the same size or
slightly larger than the spool, on top of the spool.
Using both hands, pull the thread into thread guide
A from the front. Place the thread from right to left
into the pretension guide B.
Now pass it through the left threading slot down-
wards through the left-hand side of the tension disk.
Pull the thread around the stop C and into the right
threading slot and upwards to the take-up lever. The
thread must be pulled into the take-up lever from
left to right. Pass the thread downwards in the right-
hand threading slot.
Pull the thread from the side behind one of the two
thread guides D.