Pfaff creative 2134 Owner's Manual - Page 28
Winding the bobbin through the needle
View all Pfaff creative 2134 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Winding the bobbin through the needle It is possible to wind the bobbin even when the machine is fully threaded. Raise the presser foot to the up position. Pull the needle thread underneath the presser foot and upward through the right-hand threader slot. Place the thread from left to right through the take-up lever D. Important: The take-up lever must be at its highest position. Guide the thread to the right under thread guide C. Place an empty blue bobbin on the bobbin winder aligning the small rectangular hole on the bottom side of the bobbin with the small pin of the bobbin winder. The Pfaff logo is facing up. Push the bobbin to the right. Wind the thread tail clockwise several times around the bobbin. Turn on the machine. Hold the thread tail firmly and press the foot control. As soon as the bobbin is full, the winding action will be stopped automatically. Push the bobbin to the left, cut the thread and remove the bobbin from the winder. 2:10 D C