Pfaff powerquilter 16.0 Manual - Page 21

Using the Touch Screen Displays Display Menus Pedal 0 % 25 % 87 % STOP 54 % STOP 25 % More Figure 18 Pedal ual 0 % 0 % Figure 19 25 % 25 % 87 % STOP STOP 54 % 87 % Figure 20 25 % OP 54 %More The powerquilter™ 16.0 quilting machine has a color touch-screen display on the front of the machine. Settings are changed using this display. Main Screen Button Functions (Figure 18) Pedal Status The status of the foot pedal connection is displayed in the top left corner of the Main screen (Figure 18). If the foot pedal is not properly connected the message "Check Pedal" will appear. Once the pedal is connected properly the word "Pedal" appears in that space. On/Off Indicator The box in the center of Figure 19 indicates whether or not the motor is running. It will be red when the machine is stopped and green when the foot pedal is pressed. Current Speed The box in the top right of Figure 19 is the current percentage of full speed the machine is running. The value displayed will vary as you press and release the foot pedal. The maximum percentage value that is displayed is controlled by the Limit that is set for the machine. Limit Controls The Limit box encompasses two main features, the "My Speed" controls and Preset buttons. The My Speed controls consist of "+" and "-" buttons and the My Speed display box (Figure 20). Pressing the "+" button will increase the maximum motor speed the pedal controls. Pressing the "-" button will decrease the maximum speed. The My Speed range is between 5 % and 100 % or between 75 and 1500 stitches per minute (SPM). The current percentage My Speed value is displayed in the box under the "Limit" text. This My Speed setting will be preserved when the machine is shut off, allowing you to begin quilting again at the same speed when you turn the machine back on. Page 21